- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
SD-WAN link FortiGate 100F
Hi,
I have 3 internet links:
- Broadband 250/250 Mbps PPPoE
- Corporate 1000/500 Mbps Static IP
- MPLS 10/10 Mbps Static IP
The issue you're facing is that you cannot access the AGO website or the site is very slow, but you can access Google, YouTube, and social media normally.
How can you fix this issue? And how should you configure the SD-WAN link?
FG100F
Firmware : v6.2.3 build6188
- Labels:
-
FortiGate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
sdwan config depends on your needs. It can do load balancing or just fallback. And you can have explicit rules for specific sites if needed.
--
"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Issue appears to be specific to AGO website access through one of the 3 links. Probably, you could check which link provide better access to the website. You may, for test, create a policy route for the source IP/machine towards one of the ISP at a time, and check the website access, and repeat for all 3 links. In that way, you could determine if the issue is with end server hosting the website, or one of the internet links having issue(may involve isp to reroute the traffic to AGO website through a different upstream of theirs as well).
Best regards,
Jin
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi uearn,
You can create a manual rule and route the traffic one by one via specific ISP and can isolate if any ISP is causing the issue
Salon Raj Joshi
