Help
Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
jasetcs
New Contributor III

Created on ‎07-19-2018 02:46 AM

SD WAN help

I have a fortigate 60e with 2 WAN lines coming in so I setup SD WAN with 50% volume on each and then set a SD-WAN status check and it shows as both WANs up. Then I changed my IPv4 policy instead of it been WAN1 to SD-WAN but now the internet wont work.

 

ANny ideas whats wrong ive followed guides but doesnt seeem to work oddly. Is there a step I've missed?

 

Switched back to just using 1 WAN for now but really wnat 2 so we have a fail safe if one goes down.

2172
0 Kudos
1 Solution
AQ
New Contributor II

Created on ‎07-19-2018 07:49 AM

Did you add an static route to 0.0.0.0/0 using sdwan interface?

View solution in original post

1022
0 Kudos
1 REPLY 1
AQ
New Contributor II

Created on ‎07-19-2018 07:49 AM

Did you add an static route to 0.0.0.0/0 using sdwan interface?

1023
0 Kudos
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors
View all
Broad. Integrated. Automated.

The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.

Social Media
Security Research
Company
News & Articles
Contact Us

Copyright 2024 Fortinet, Inc. All Rights Reserved.