When do you need to put a gateway for SDWAN interfaces? The default when adding a new interface member to the SD-WAN group is 0.0.0.0. If you have the default route set already in your routing table, do you still need to specify the gateway in SD-WAN interface?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
WAN Interface => Yes, Gateway IP Addrees that ISP provied.
[Static Route]
Destination:0.0.0.0/0.0.0.0
Interface:SDWAN
SDWAN VPN Interface => No need.
[Static Route]
Destination:Peer Site IP / Peer Site Mask
Interface:SDWAN VPN
Hello,
If an interface has static IP configuration then you need to provide the gateway member while adding that interface to SD-WAN zone. In case of DHCP IP configuration, DHCP server provides the gateway information so you can put 0.0.0.0 while adding the interface into SD-WAN zone.
Regards.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.