SD-WAN and server publish

[Ahmed]

After i created a SD-WAN , i cannot publish server to real external IP address

i created Virtual IP and assigned WAN1 as Interface .

but when i created IPV4 there is only SD-WAN as Incoming Interface .

i cant access my sever

[Agent_1994]

It should work if you choose SD-WAN as the incoming interface and the virtual IP as the destination. 

May i see your setup?

[FMJianu]

Hello,

I ran into this problem too. After i created sd-wan interface, i cannot port forward services. Do you have any links to documentations where i can find how exactly this can be done?

Thanks

[Agent_1994]

FMJianu wrote:

Hello,

I ran into this problem too. After i created sd-wan interface, i cannot port forward services. Do you have any links to documentations where i can find how exactly this can be done?

Thanks

Something like this: http://prntscr.com/oe53ac.

Business as usual, only that you'll use the SD-WAN as the incoming interface.

[Yathish]

Even I had the same issue.

I some how manged to fix this. below is what i did to fix it.

Existing policy:

Incoming - sdwan

outgoing - dmz

source: all

Destination-vertual ip

Services- required services

Created a new policy:

Incoming- dmz

outgoing- sdwan

source: server ip

destination: all

services- required services

After creating above new outgoing policy. My webserver started working normally..

Hope this helps..:)