Hello guys,
I have a dual WAN scenario and honestly I have some doubt.
I noticed that when the SD-WAN has been configured, I can't create any WAN to LAN policy.
There is a way to create a NAT 1:1 SD-WAN -> LAN policy?
Therefore, is this the the right way (set-up SD-WAN) to obtain this goal:
if the WAN2 (WAN2) fails or run out of bandwith, then activate the WAN1
TNX
Solved! Go to Solution.
Hi @it-andreagx,
Yes, it is possible to create SD-WAN -> LAN policy and use Virtual IP for port forwarding (DNAT). Since you are using SDWAN, wan1 will take over if wan2 fails or vice versa.
Regards,
Hi @it-andreagx,
Yes, it is possible to create SD-WAN -> LAN policy and use Virtual IP for port forwarding (DNAT). Since you are using SDWAN, wan1 will take over if wan2 fails or vice versa.
Regards,
User | Count |
---|---|
2094 | |
1182 | |
770 | |
451 | |
344 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.