Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
heyyo
Contributor

SD-WAN Zone (virtual-wan-link) with Disabled Status

Hi,

 

I am trying to configure SD-WAN but not sure why I am getting a disabled status on the SD-WAN zones as below:

 

image.png

Interface: virtual-wan-link

Link: *greyed arrow pointing down* (disabled)

Type: SD-WAN Zone

 

Interface: Test

Link: *greyed arrow pointing down* (disabled)

Type: SD-WAN Zone

Members:

wanport_1 (green icon)

wanport_2 (red icon)

 

Any reason why this is happening? How do I enable the sdwan zone?

 

Thanks!

2 REPLIES 2
rtanagras
Staff
Staff

Hi @heye - As far as I know, if there are no interfaces added to that SDWAN Zone, it is disabled by default. However, once an interface is added, it should turn green, indicating that the Zone is up.

Best,
Ricky
Ade_23
Staff
Staff

Hello @heyyo,

 

Here is an article on enabling the sdwan interface: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Enable-and-disable-SD-WAN-options/ta-p/193...

 

Do you have any interfaces in that zone as asked by @Ricky? 

 

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors