SD WAN Problem with 2 access One with NAT and one without NAT

[RolandBaumgaertner72]

Hi,

how can we configure this situation. We have a SD Wan with normal internet access A (1GB/1GB) with NAT router before the FG. The other interface is B MPLS and we dont have NAT.

Today A failed and users didnt have access to the internet but dod have access to the MPLS network. The SASE policy had NAT activated and so the access via B MPLS access dondt work. Cloning the same policy without NAT and pushing above solved the problem. Now with access A working again (preferred by SD WAN rule for internet access), users again could not access to the internet because of the policy above with NAT.

What can we do? I would like both options to work without having to change the policies.

Thanks!

[funkylicious]

hi, can you post the routing table on the FGT for SD-WAN members ?