- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
SD-WAN DUAL-HUB-BGP
Hi,
I have a dual hub topology active-active. I configure BGP on the hub with Capability: default originate enable, to inject the default route to the branch.
In the branch i can see on the routing table 4 default route 2 for HUB1 and 2 for the HUB2..
ex: Routing table branch
0.0.0.0/0 [5/0] via 172.16.1.1, HUB-1-1_0 active  sdwan routes
[5/0] via 172.17.1.1, HUB-1-2_0 active
[5/0] via 172.16.2.1, HUB-2-1_0 active
[5/0] via 172.17.2.1, HUB-2-2_0 active
The question is.
It is possible or how can i do that in the branch fgt prefer o inject on the routing table the default route for HUB1 and just in case the connection for HUB1 is down, the FGT inject o prefer the default route for HUB2 ?? any idea ??
#sdwan FortiGate
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Have you tried the tag-match mode explained in the admin guide?
If you have found a solution, please like and accept it to make it easily accessible for others.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Have you tried the tag-match mode explained in the admin guide?
If you have found a solution, please like and accept it to make it easily accessible for others.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I will try it, thanks.
I think this could word.
![](/skins/images/EC9FF2F7BE06D4243426EA19DD2C8052/responsive_peak/images/icon_anonymous_message.png)