Hi,
I have a dual hub topology active-active. I configure BGP on the hub with Capability: default originate enable, to inject the default route to the branch.
In the branch i can see on the routing table 4 default route 2 for HUB1 and 2 for the HUB2..
ex: Routing table branch
0.0.0.0/0 [5/0] via 172.16.1.1, HUB-1-1_0 active sdwan routes
[5/0] via 172.17.1.1, HUB-1-2_0 active
[5/0] via 172.16.2.1, HUB-2-1_0 active
[5/0] via 172.17.2.1, HUB-2-2_0 active
The question is.
It is possible or how can i do that in the branch fgt prefer o inject on the routing table the default route for HUB1 and just in case the connection for HUB1 is down, the FGT inject o prefer the default route for HUB2 ?? any idea ??
#sdwan FortiGate
Solved! Go to Solution.
Have you tried the tag-match mode explained in the admin guide?
Have you tried the tag-match mode explained in the admin guide?
I will try it, thanks.
I think this could word.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.