Hello,
I have a #Fortigate 100F with v7.0.12 and I have a issue with VPNSSL + Azure SAML
I configured it in others Fortigate with no problem, but in the last i can't connect with Forticlient, it stops in 40% when i try to connect.
I have enabled debug and i see this error:
__samld_sp_login_resp [842]: Failed to process response message. ret=-111(Failed to verify signature.) samld_send_common_reply [114]: Code: 1, id: 576, data_len: 56 samld_send_common_reply [122]: Attr: 21, 8, samld_send_common_reply [122]: Attr: 22, 32, Failed to verify signature. |
Can someone helps me to find the problem?
Thanks, regards
Solved! Go to Solution.
Hello @aalvarezj ,
Thank you for reaching out.
This error in SAML debugs generally points to an issue with the certificate used in the SAML communication.
Can you try to re import the SAML certificate and test again ?
Hello @aalvarezj ,
Thank you for reaching out.
This error in SAML debugs generally points to an issue with the certificate used in the SAML communication.
Can you try to re import the SAML certificate and test again ?
Hello @aalvarezj
Below are some docs that may help to determine what is preventing you from connecting:
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Possible-reasons-for-FortiClient-SSL...
--- ref 40% failure, this could be caused by TLS mismatch. below is how to control the SSL and TLS versions used by the FortiClient when connecting to SSL VPN
https://community.fortinet.com/t5/FortiClient/Technical-Note-How-to-limit-the-SSL-and-TLS-versions-o...
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2023 Fortinet, Inc. All Rights Reserved.