Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
cybernet2025
New Contributor III

SAML timeout

How can I config the login time out for SSL VPN with SAML?
FortiGate or Azure.

E88EBEBA-F038-4343-B2BD-2C9109E03E1F.jpg

4 REPLIES 4
ebujedo
Staff
Staff

Hello cybernet2025,

 

Please try:

config system global
set remoteauthtimeout {integer}
end

Best regards.

 

Ezequiel

Staff
cybernet2025
New Contributor III

the configure on my firewall is 180 second, why the dialog show 360 second? please find the attached.

ebujedo

Hello cybernet2025,

I did more internal research and I found the timer you modified will be the real one, any attempt to finish authentication after 180 seconds will fail, but the one shown is hard-coded on FortiClient side.

Best regards.

 

Ezequiel Bujedo

 

Staff
cybernet2025
New Contributor III

Thank you for your feedback, but I confused about this subject.
"but the one shown is hard-coded on FortiClient side." I've 5 location and there are different each locations. 
location A=50 s
location B = 100s
location C =.......
there are not the same.

Top Kudoed Authors