We would like to use Office 365 for SSO. This document describes how to use Azure as an SSO Identity Provider: https://kb.fortinet.com/kb/documentLink.do?externalID=FD45699
The document instructs to go to "SAML SSO", however I do not see "SAML SSO" under the "User and Device" section of the GUI. Running 6.2.2 and as far as I can tell it's not an option under feature visibility that is turned off. Any ideas?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello,
It is under Security Fabric > Security Settings > Enable Telemetry, set FortiGate as root,
It will ask you for IP of FortiAnalyzer > use 0.0.0.0. Rest can be configured there as it is in: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/952688/manual-saml-sso-configuration
Best Regards,
Alivo
livo
Under Security Fabric -> Settings, I only have options for FortiAnalyzer (which we have our Fortianalyzer server setup there) and Cloud Logging. I do not have a Telemetry setting. Please note this is under a VDOM.
If I go to the Global VDOM, then I also see "Central Management" which we have setup for the FortiManager, "Sandbox Inspection", "Fabric Devices" and "Forticlient Enpoint Management System".
Pavel_Livonec_FTNT wrote:Hello,
It is under Security Fabric > Security Settings > Enable Telemetry, set FortiGate as root,
It will ask you for IP of FortiAnalyzer > use 0.0.0.0. Rest can be configured there as it is in: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/952688/manual-saml-sso-configuration
Best Regards,
Alivo
I've done this but I'm still not seeing SAML SSO under User & Device. 101F in HA, no VDOM, 6.2.3.
I don't think the Telemetry answer is related to the OP.
I also would like to configure SAML for admin SSO and do not have the option in Users & devices.
Please advise.
@chrismo16
I think that the telemetry answer is definitely in response to OP's question. I think there's a dependency on having it set up for SSO to work.
Anybody has definitive answer to get it to show GUI: User & Device -> SAML SSO
Seb
depending on your FortiOS version you won't be able to get it and if you do you will loose it with an upgrade. as people mentioned the SAML config moved to the Security Fabric section and that menu option is gone. this was confirm by Fortinet support.
the work around mentioned here didn't quite work for me, i just set it up via the CLI (6.2.4) and then was able to see it when enabling Security Fabric / Telemetry. In 6.4.2 it worked better as described above.
It is under Security Fabric > Security Settings > Fabric Connectors
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.