Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
slouw
Contributor

Rugged 60F-3G4G vs 40F Features

Greetings Forti People

Why does my Rugged 60F-3G4G have more options available in the
System > Feature Visibility section?
See below.

Both are running 7.0.11 as you can see.

2023-10-31 09h06m48s04 Rugged 60F-3G4G vs 40F Features.jpg

1 Solution
kcheng
Staff
Staff

Hi @slouw 

 

The reason behind that is due to VDOM enabled on your FG40F. Some configurations and CLI commands are only available in global VDOM, hence, when you are in FG-Traffic VDOM, you will not be able to view the configurations for global VDOM. That also applies to the GUI feature visibility.

 

On the other hand, some features depends on the presence of hardware component. 

https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiGate_Rugged_Series.pdf

https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/fortigate-fortiwifi-40f-series.pdf

Cheers,
Kayzie Cheng

If you have found a solution, please like and accept it to make it easily accessible for others.

View solution in original post

1 REPLY 1
kcheng
Staff
Staff

Hi @slouw 

 

The reason behind that is due to VDOM enabled on your FG40F. Some configurations and CLI commands are only available in global VDOM, hence, when you are in FG-Traffic VDOM, you will not be able to view the configurations for global VDOM. That also applies to the GUI feature visibility.

 

On the other hand, some features depends on the presence of hardware component. 

https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiGate_Rugged_Series.pdf

https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/fortigate-fortiwifi-40f-series.pdf

Cheers,
Kayzie Cheng

If you have found a solution, please like and accept it to make it easily accessible for others.
Top Kudoed Authors