Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
danto
New Contributor

Routing table not displayng

Hello, I have a strange situation. The routing table is not displayed from CLI on a Fortigate 110C. The output of " get router info routing-table all" is blank. The routing table is present in GUI and is working as it should. I was using 4.0MR2P15 and I upgraded to 4.0MR3P15. The result is the same. Any ideea? Georgian
There is no patch for human stupidity...
There is no patch for human stupidity...
2 REPLIES 2
ede_pfau
Esteemed Contributor III

Cool. Real life is way more interesting than FCNSP exams... First thought: is the FGT running in transparent mode?

Ede

"Kernel panic: Aiee, killing interrupt handler!"
Ede"Kernel panic: Aiee, killing interrupt handler!"
danto
New Contributor

Hi, It has 2 vdoms, both in NAT mode. the problem is just in a single VDOM , the other one is showing the routing table. In the VDOM with the problem I am running BGP, which by the way works fine, I just cannot see the routing table :) Georgian
There is no patch for human stupidity...
There is no patch for human stupidity...
Labels
Top Kudoed Authors