Routing application traffic through backup WAN with existing static route

[JT3]

I have redundancy set up per this article on a 60E running 6.02  https://cookbook.fortinet.com/redundant-internet-basic-failover-56/   We use Crashplan Pro for our backup solution.  I would like to route all of that traffic over the backup wan link instead of the primary.    How can I accomplish this?   Thank you.

[JT3]

I figured it out.

First, go to Policy & Objects -> Addresses

Create address(s) for the destinations, and enable static route radio

Then create an address group

Then go to Network -> Static Routes

Create a new static route, then select "named address'

Group as destination.  

Gateway 0.0.0.0

Interface of the backup wan connection

Enable it.  That's it.  All is well in the world