Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Routing application traffic through backup WAN with existing static route
I have redundancy set up per this article on a 60E running 6.02 https://cookbook.fortinet.com/redundant-internet-basic-failover-56/
We use Crashplan Pro for our backup solution. I would like to route all of that traffic over the backup wan link instead of the primary.
How can I accomplish this?
Thank you.
Labels:
- Labels:
-
6.0
1 REPLY 1
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I figured it out.
First, go to Policy & Objects -> Addresses
Create address(s) for the destinations, and enable static route radio
Then create an address group
Then go to Network -> Static Routes
Create a new static route, then select "named address'
Group as destination.
Gateway 0.0.0.0
Interface of the backup wan connection
Enable it. That's it. All is well in the world
