Hey, everybody!
anyone have any experience? I set up an ipsec tunnel between FG and AWS. The tunnel is up, static route and policies are in place. Ping from aws to fg is pinging. but from fg to aws is not.
I started looking, I saw an outgoing ip during the ping from the management port. although it is not even connected. there is no such route. even if I turn off the mgmt port, traffic to the tunnel still comes from it. I put 0.0.0.0.0/0 on the mgmt port.
Now traffic started coming from FortiLink port (802.3ad Aggregate), also disabled port, also put 0.0.0.0.0/0 ip on it. now traffic went to vpn tunnel from wan port. How can this be fixed? I don't have such routes, does fg make them up by itself)?
model 400F - os v7.2.6
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello Alex88,
if you are pinging directly from the Fortigate with "execute ping x.x.x.x" then the FortiGate is forwarding traffic with outgoing interface IPsec tunnel, and the tunnel does not have an overlay IP, the FortiGate is selecting the physical interface with the smallest index as source IP.
You can refer to the below article:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Source-IP-for-self-originating-IPsec-tunne...
You should be able to ping with the source method as explained by my colleague syordanov.
Hello Alex88,
How do you generate the traffic from your 400F towards AWS ?
Do you generate that traffic using ' execute ping x.x.x.x' from FG or that icmp is generated from host behind your FG 400F?
My advise is to check the local encryption domain of your FW and pick one IP address from that range and specify as a source IP for the ICMP on FG :
execute ping-options source x.x.x.x <--- where x.x.x.x is the IP address part of your local encryption
execute ping y.y.y.y <--- where y.y.y.y is the host behind AWS
Best regards,
Fortinet
Hello Alex88,
if you are pinging directly from the Fortigate with "execute ping x.x.x.x" then the FortiGate is forwarding traffic with outgoing interface IPsec tunnel, and the tunnel does not have an overlay IP, the FortiGate is selecting the physical interface with the smallest index as source IP.
You can refer to the below article:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Source-IP-for-self-originating-IPsec-tunne...
You should be able to ping with the source method as explained by my colleague syordanov.
FG makes up the routing table itself when it can't explicitly determine the source address. When you ping from fortik, it doesn't have a source address on the interface and takes from the "first" one that comes up (you can argue the logic, but that's how it's done), that port could be mgmt and the mgmt port will be disabled. Traffic will come from this interface. It is necessary to assign an IP to the interface for the tunnel.
Question solved! Thank you for answering me!
PS - links that have helped me
Hello Alex88,
Perfect, glad we could be of help.
You can also select one of the comments as a solution so in case another community member who has the same query/issue can find the solution quickly.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1702 | |
1092 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.