Route traffic based on FQDN targeted page

[IronZ]

Hello,

I've been searching for a solution on our Fortigate 80F. I need to route SSL traffic to different servers based on the FQDN but also including the targeted web service/page. This is for an ArcGIS deployment. I've found how to accomplish this with the FQDN alone, but not with the /page.

For example:

https://server1/un  gets routed to server3:6443

and

https://server2/ent  gets routed to server4:6443

My knowledge is limited here, so hopefully I'm describing this in a way you'll understand, haha!

Thanks!

[ozkanaltas]

Hello @IronZ ,

Actually ZTNA server can cover your request, but when you proceed this way, you should use FortiClient for that connection. Because ZTNA needs to client's ssl certificate created by FortiClient.  

https://docs.fortinet.com/document/fortigate/7.6.4/administration-guide/325639/ztna-https-access-pro...

Unfortunately, no other solution on FortiGate. You should use the ADC product for your request. 

[jiahoong112]

yes this is possible. you will have to create a virtual-server as such: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Configure-a-virtual-server/ta-p/194457 

https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/713497/virtual-server