Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
IronZ
New Contributor

Route traffic based on FQDN targeted page

 

Hello,

 

I've been searching for a solution on our Fortigate 80F. I need to route SSL traffic to different servers based on the FQDN but also including the targeted web service/page. This is for an ArcGIS deployment. I've found how to accomplish this with the FQDN alone, but not with the /page.

 

For example:

 

https://server1/un  gets routed to server3:6443

and

https://server2/ent  gets routed to server4:6443

 

My knowledge is limited here, so hopefully I'm describing this in a way you'll understand, haha!

 

Thanks!

 

2 REPLIES 2
ozkanaltas
Valued Contributor III

Hello @IronZ ,

 

Actually ZTNA server can cover your request, but when you proceed this way, you should use FortiClient for that connection. Because ZTNA needs to client's ssl certificate created by FortiClient.  

 

https://docs.fortinet.com/document/fortigate/7.6.4/administration-guide/325639/ztna-https-access-pro...

 

 

Unfortunately, no other solution on FortiGate. You should use the ADC product for your request. 

If you have found a solution, please like and accept it to make it easily accessible to others.
NSE 4-5-6-7 OT Sec - ENT FW
If you have found a solution, please like and accept it to make it easily accessible to others.NSE 4-5-6-7 OT Sec - ENT FW
jiahoong112
Staff
Staff

yes this is possible. you will have to create a virtual-server as such: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Configure-a-virtual-server/ta-p/194457 

https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/713497/virtual-server 

**If you come across a resolution, kindly show your appreciation by liking and accepting it, ensuring its accessibility for others**
Announcements
Check out our Community Chatter Blog! Click here to get involved
Labels
Top Kudoed Authors