I have a yaelink T58A business phone and a Robin Doorbell with a cam in it (h264).
If the doorbell calls the phone and answer it, i can see the cam but it is inmeddiatly freeze. Talking is no problem.
I take the phone to my home and test it on a draytek system. If i call de doorbell it sees without isues the cam.
So it must be something in my fortigate network.
I have a fortigate 60E with 7.2.2 (older version was also not working)
And a fortigate 248 switch also with 7.2.2 (older version was also not working)
Anybody an idea?
Info in the Robin Doorbell
Thank you for using the Community Forum.
I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.
We are still looking for an answer to your question.
We will come back to you ASAP.
try to add Multicast policies and simplify the firewall policies you have, by removing security profiles.
You can trace packets from either node with a packet capture
diag sniff packet any 'host <ip>' 4 0 a
And then you test that situation again. You will see packets on the inbound interface, you should see packets on the outbound interface as well. A packet is seen minimum twice.
If you only see a packet inbound but not outbound, check why that would be happening.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2023 Fortinet, Inc. All Rights Reserved.