With FortiOS 7.0.2, is it possible to have more than one dialup client to the same PHASE1?
it seems that when the remote dialup IPSec peer has a dynamic IP one has to set a dyndns gw in the PHASE1 config setting in order to use static routes.
In previous version (6.0.12,) when you created a Static Route to PHASE1 just by picking the destination and the interface PHASE1 but without typing an explicit gatway (0.0.0.0), FortiOS was correctly routing traffic through the proper tun_id associated with the dialup user for PHASE2-A and PHASE2-B (which are different public dynamic IP). Can't we no longer reuse the same PHASE1 for two dyndns with dynamic IP in version 7.0.2?
Version 7.0.2 is not capable of sending traffic through the proper tun_id with the very same route setting that was working before.
I tried to follow this guide => https://docs.fortinet.com/document/fortigate/7.0.2/administration-guide/790613/phase-1-configuration but the issue is still there.
Thank you for your help.
Have a nice day!