Restart SSLVPN

[SCCH]

Hello! Today i got an SSLVPN error in the browser: Error: connection interrupted The connection to the server was reset while the page was loading I was not able to establish a SSLVPN Connection and no error appeard in the logs, so i restarted the Firewall and everything is working again. Is there a possibility to reset/restart the " sslvpn" daemon on the console or webinterface? I was looking for a " diag debug" command for SSLVPN, but did not find a suitable command, does someone know a debug command vor SSLVPN?

[rwpatterson]

From the GUI, you could simply disable/enable the SSL VPN.

[SCCH]

Sorry, but there is no option Enable/Disable in the Gui, where can i find that? If it is possible in the gui there must be an equivalent in the console, or not?

[bbache99]

you could try: diag test application <applicationname> 99 That will reset applications - not sure which the SSL one is, on my 100D I have sslacceptor and sslworker. Hope this helps!

[rwpatterson]

In version 4.2.14:

[Carl_Wallmark]

Bob, in MR3 and later, they have removed the " Enable SSL-VPN" checkbox, its a CLI only feature.

[rwpatterson]

Well, the OP never mentioned which version, so I threw in my screen shot as an FYI.

[SCCH]

Hello, you are right Bob, i' ve forgotten to tell the version, it is 4.3 Patch 11. Running " diag test application <name> 99" i have only ssl available, will try this next time sslvpn makes trouble, thanks!

[Carl_Wallmark]

Well, the OP never mentioned which version, so I threw in my screen shot as an FYI.

Yes, I understood that, just wanted you to know

[rwpatterson]

Thanks for that. Something else to look forward to...