Reset IP restriction on Admin account

[IDMJohn]

I have a Fortigate 60F with 2 networks.  10.25.0.0/24 is the default internal network and I have 10.25.10.0/24 configured on Port 3.  There is not policy routing between these networks yet.

I accidently set the Trusted IP restrictions on the Admin account to 10.25.10.0/24 so now I cannot log into the GUI at all, from either network.

How do I reset this?

Help!

[funkylicious]

Hi,

If you have https enabled on port3 you should be able to login using a device with an IP from that subnet connected to it.

Otherwise you should use the console port and remove the trusted host.

[IDMJohn]

https is enabled on the 10.25.10.0 network.  I connected to that network but cannot connect to the firewall at 10.25.10.1 (gateway of that network) or 10.25.0.1 (address I use on the internal network).  I also cannot ping 10.25.10.1, but do have internet access on the 10.25.10.0 network :(

I didn't setup any routing between these networks yet :(

How do I connect to the console?

[IDMJohn]

I got into the console and reset the IP restriction.  Thank you for pointing me in the right direction!