Remove interface dependancy so I can change VDOM

[slouw]

I apparently cannot change the VDOM for this interface presumably due to the Reference shown.

Is it on account of the reference?

What should I do?

Much appreciate any help...

[AEK]

Unlink the interface from the address.

If you can't, delete the address.

If you can't, remove all routes (and may be policies and other objects) that are referencing this address.

[slouw]

Thank you for reply.
The interface config for interface lan is shown at 3.1 and 4.2 in the screenshot.
I want to move the lan interface to newly created VDOM FG-traffic (4.1)
Under global the get router command is not available. (3.2)
Under vdom root I can see get router commands (4.2)
As you can see there seems to be nothing in the routing table.
The lan config shows no ip address configed as instructed. (I presume that is what you mean by unlink the interface from the address)
What am i doing wrong?
Much appreciate any further help

[slouw]

Is this a hint of where I should be looking?
How would I check and eliminate this using the CLI? (No GUI access currently)

[slouw · Accepted solution]

Yeah baby goo man go!!!!!!!