Remove config from fortimanager

[ceForti]

I am trying to push few config from fortimanager to fortigate device. Below unwanted config is still running from fortimanager. i dont want this config to be pushed to fortigate. How do I remove this config, so that next time when i run install wizard this config does not comes;

config system virtual-wan-link

    config service

        edit 1

            set member 5

        next

        edit 2

            set member 6

        next

        edit 3

            set member 3

        next

        edit 4

            set member 6

        next

        edit 5

            set member 5

        next

        edit 6

            set member 6

        next

        edit 7

            set member 3

        next

        edit 8

            set member 4

        next

    end

end

running this gives error;

command parse error before 'member'

Command fail. Return code -61

command parse error before 'member'
Command fail. Return code -61

[sw2090]

SD-WAN is part of the device config. So simply do it the reverse path so to say:

make sure you have to correct config on your fortigate (the one(s) which has/have to wrong one in FMG).

then in FMG device manager do a retrieve config from those FGT(s).

If you tell FMG to retrieve (device) config from a FGT it will throw the settings that currently are in FMG away and retrieve a new device config right from the FGT. 

The only exception from this is things that you set up inside an assigned provisioning template!

[ceForti]

Thank you @sw2090 

Infact I tried retrieving the config from Fortigate, still this error occurs. Engaged Fortinet TAC, still its the same.