- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Remove Port01 to configure my DHCP
Hello, I would like to take port01 to configure my DHCP, but when I take it off Vlan Switch I can no longer access the fortigate, how do I do it?
Solved! Go to Solution.
- Labels:
-
FortiGate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
internal1 (not "port1") seems to be the only port plugged in. Are you connected to the FortiGate through it? If yes, then removing it will of course cut you off. :)
Connect yourself through another port (e.g. internal2), and then you will be able to pop internal1 out without a problem.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
internal1 (not "port1") seems to be the only port plugged in. Are you connected to the FortiGate through it? If yes, then removing it will of course cut you off. :)
Connect yourself through another port (e.g. internal2), and then you will be able to pop internal1 out without a problem.
