- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Remote access HPE switch
i need to have a remote access to my hpe 1820 switch behind 2 firewall in HA mode
is it possible?
Solved! Go to Solution.
- Labels:
-
FortiBridge
-
FortiClient
-
FortiConnect
-
FortiGate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
If the switch has a management IP configured, yes sure. Most secure way to access it over the public network is via VPN. First connect to the VPN than access the switch using its private IP.
The easiest not recommended way is to do a port forwarding (Virtual IP) and limiting the public IPs that can access it in the firewall policy.
If you have found a solution, please like and accept it to make it easily accessible for others.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes, having FortiGate in HA mode doesn't put any limitations in the functions that the firewall provides if its configured correctly and both nodes have the same access in the network.
If you have found a solution, please like and accept it to make it easily accessible for others.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
If the switch has a management IP configured, yes sure. Most secure way to access it over the public network is via VPN. First connect to the VPN than access the switch using its private IP.
The easiest not recommended way is to do a port forwarding (Virtual IP) and limiting the public IPs that can access it in the firewall policy.
If you have found a solution, please like and accept it to make it easily accessible for others.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
even if i have two fortigate in a HA mode?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Yes, having FortiGate in HA mode doesn't put any limitations in the functions that the firewall provides if its configured correctly and both nodes have the same access in the network.
If you have found a solution, please like and accept it to make it easily accessible for others.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank you for helping
