Hello!
Seemingly, 'Reserved HA Management' interfaces (config ha-mgmt-interfaces) are meant for incoming administrative connections, however, Fortinet makes an exception with 'ha-direct' for some outgoing connections.
Is it possible to use these interface for remote (esp. TFTP) backups using "execute backup full-config tftp ..."?
R's, Fern.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi fern-X,
When HA-direct is enabled, FortiGate uses the HA management interface to send log messages to FortiAnalyzer and remote syslog servers, sending SNMP traps, access to remote authentication servers (for example, RADIUS, LDAP), and connecting to FortiManager, FortiSandbox, or FortiCloud.
For tftp backups the traffic will not be pushed from ha management interface but firewall will use its routing table to forward the traffic.
Regards,
Pratik
Created on 08-15-2023 08:35 PM Edited on 08-15-2023 08:41 PM
Hi Pratic,
thank you, however, your reply is already well covered by Fortinet documentation. My question was: "Is it possible to use these interface for remote (esp. TFTP) backups using "execute backup full-config tftp ..."?" - is the answer Yes or No? If No, can you suggest alternative method?
R's, Fern
Hi Fern-X,
In case of HA management interface, in the background, FortiGate creates a hidden VDOM named vsys_hamgmt.
Can you please try to run the configuration backup command from it. Sharing one KB regarding the hidden VDOM named vsys_hamgmt:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-HA-Reserved-Management-Interface-s-hidden-...
exe enter vsys_hamgmt
execute backup full-config tftp ----
Regards,
Pratik
Created on 08-15-2023 10:13 PM Edited on 08-17-2023 05:34 PM
Hi Pratik,
I know about that hidden VDOM, but if you look at its Routing Table, there's no default route, so, how can it be used to send to a remote (ie. non-directly-connected) network - here's proof:
fg200f (root) # execute enter
current vdom=vsys_hamgmt
fg200f (root) # get router info routing-table details censored_gwy_ip
% Network not in table
To prove you wrong, I tried 'execute backup config tftp ...' - and.. it worked! Obviously, 'gateway' defined in "config ha-mgmt-interfaces" is somehow in this VDOM. I then looked at FIB, and noticed:
fg200f (root) # execute enter
current vdom=vsys_hamgmt
fg200f (root) # get router info kernel
:
tab=254 vf=6 scope=0 type=1 proto=17 prio=0 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=censored_gwy_ip dev=3(mgmt)
:
So, there's a Kernel Route for egress for HA1 traffic!!
If your response was based on expertise/experience (and not guesswork), then I thank you and apologise for doubting you.
Since we're here, can you please elaborate on the meaning of 'scope' field in the above printout?
R's, Fern
Hey! To solve the Fortinet exception you must know about the exception handling.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1645 | |
1070 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.