Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
New Contributor

Remote SSL VPN network is the same with the central Server network

Hi All,


I have the following dilemma where the remote site is the same IP range as the head office site.

I am configuring SSL VPN to access from the remote site. 


Is there away to configure without change the central office IP range?


I tried to follow the old kb but it did not work. 


I am using Fortios 6.2.3





I'm assuming you're using tunnel mode with FortiClient. Then the problem happens on the client side since it sees the destination is on the local network. I haven't done this but I would think it would work if you assign a different subnet for the servers then set 1-to-1 VIP (you might need SNAT w/ ippool as well if the sever side needs to initiate sessions toward the client) with the real IPs, then apply them to the policy from ssl.root to the server interface.


Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Top Kudoed Authors