Hello, I've opened a post inside "User and Authentication" section, but I'm not sure it's the best place to post this kind of problem! We lost our RSSO Agent Relais settings on FortiGate after each Policy Package installation from FortiManager. Could you check our post if you know about this problem? Regards, Chris
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Replying to my own post, but in case this is helpful for anyone, here is the fix:
At least one policy has to be enabled for RSSO by running the following via CLI:
config firewall policy edit XXX set rsso enable
Strange, because RSSO was working even without that command, but we no more purges after applying it.
Just wondering if you ever got resolution on this, as I'm having the exact same issue. Whenever I push a policy to my 1500d (5.2.6) from my Fortimanager (FMG-VM64-HV, 5.2.4) , my change file shows all the normal policy changes, and then at the end, I get this:
config user radius purge end
And when I look at "User & Device" - "Authentication" - "Single Sign-On", the RSSO Agent is gone and I have to re-create it.
Thanks!
Replying to my own post, but in case this is helpful for anyone, here is the fix:
At least one policy has to be enabled for RSSO by running the following via CLI:
config firewall policy edit XXX set rsso enable
Strange, because RSSO was working even without that command, but we no more purges after applying it.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1688 | |
1087 | |
752 | |
446 | |
227 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.