I have a 4 managed fortiswitch. An would like to sniff some ports on sw1, some on sw2 and mirror that to a specific port on sw3. From the documentation I can sniff base on mac address or ip address. It not workin, what is wrong in my config? also do I need to set VLAN 4092 on both port as tag?
Here is my config:
config switch-controller traffic-sniffer set mode rspan config target-mac edit mm:mm:mm:xx:xx:xx set description device-to-sniff end config target-port edit S248EPTFXXXXXXXX set description where-to-send-data set in-ports port38 set out-ports port38 end end
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi @rsl
https://community.fortinet.com/t5/tkb/workflowpage/tkb-id/TKB30/article-id/36
Please go through the above article for the complete details on how to configure
The target port config is to monitor the specific port, this will not send the data to the port
config switch-controller traffic-sniffer
set erspan-ip 192.168.41.100//the target IP address for the traffic,whichis routed through the FortiGate unit
config target-mac
edit 28:d2:44:ea:e7:8e //a specific MAC address you want to examine
next
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1641 | |
1069 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.