Questions about the services required for license registration FAZ/FMG (VM64)

[thekoreanguy]

Hello, wonderful people.
It intends to register the license of FAZ/FMG (VM64)

It will be conducted in a closed network, so I will work on it after opening only the services I need to register a license.
I'm trying to communicate with the license server, please let me know the information such as ip, port, etc. you need.
We will also proceed with the firmware OS upgrade.
What should I do with the order of license and OS upgrade?

Thank you for your interest.

[tgauvey_FTNT]

Hello,

Please refer to this link in our documentation for FortiAnalyzer ports:  https://docs.fortinet.com/document/fortigate/6.4.0/ports-and-protocols/766616/fortianalyzer-open-por...

In order to get signature updates, and licensing information you will need FortiAnalyzer to reach out to FortiGuard. Which uses TCP/443.

As far as getting firmware, you can do it while the Analyzer instance is connected to FortiGuard through the GUI. If you decide to put FortiAnalyzer on an air-gapped network with no access to FortiGuard, then you will just have to download the firmware manually from https://support.fortinet.com/ and upload it to your Analyzer instance.

Keep in mind though, if FortiAnalyzer cannot reach FortiGuard then you will not any of the following services for your Analyzer instance updated: AV/IPS, SMS, FTM, Licensing, Policy Override, RVS, URL/AS Update

Hope this helps!

[thekoreanguy]

Thank you for your answer.