Question about inbound load balance with ASCENLINK

[rogerio]

ATTACHED IS THE SCENARIO THAT I NEED TO CONFIGURE, I SOMEONE CAN PLEASE HELP?

[mac]

Hi,

PORT A is WAN1

PORT B is WAN2

PORT D is LAN

PLease setup PORT A & PORT B is public IP/netmask/GATEWAY,

and setup PORT D(LAN) private IP/netmask,

NAT MODE Foritgate(WAN) connect to Ascenlink(LAN),

Fortigate default gateway is Ascenlink LAN IP,

Ascenlink AutoRouting default is work,

when ISP1or2 Link DOwn,your Can still connect internet.

mac

[Fullmoon]

hello, could somebody share video tutorials for ascenlink?

Appreciate in advance.

[mac]

hi,

There is no reference video.

Config Inbound Load Balance Please Enable MultiHoming.

mac

[Joshua_MJ]

Once again have a look at this link

http://www.fortinet.com/s...eets/FortiWAN-200B.pdf

[Fullmoon]

hello guys,

Here's the existing diagram of the client.

I have some clarifications on how to position Ascenlink 5000 here.

Here are the lists of Client Objectives and how to achieve this?

1. Lease Downtime/Minimal Changes made on the fortigate/firewall side

2. Fortigate configured (VIP) to publish the ff servers.

200.200.200.10 --->192.168.20.10 Web Server

200.200.200.11 --->192.168.20.11 Application Server

100.100.100.10 --->192.168.20.12 Email Server

100.100.100.11 --->192.168.20.12 DNS Server

3. All LAN Network http traffic must pass thru ISP 1

4. All DMZ Network ftp traffic must pass thru ISP 2

5. IPSec VPN is also configured in Fortigate to remote site

Deeply appreciated for any feedback.

regards

[Fullmoon]

hi rogerio, are you to setup your design accordingly?