Hi all, hopefully and easy question.
When creating an address object on the Fortigate (Policy & Objects/Addresses), what is the purpose of the Interface selection?
Does it restrict that address to only being accessible via that interface?
thanks
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi,
When you have configured the address object with bind to interface, you cannot configure the firewall policy for different interface with the configured address object. If you configured address object A bind to interface 1 then you cannot configure the firewall policy with address object A binding to interface 2.
Regards
Jamal
Hi,
When you have configured the address object with bind to interface, you cannot configure the firewall policy for different interface with the configured address object. If you configured address object A bind to interface 1 then you cannot configure the firewall policy with address object A binding to interface 2.
Regards
Jamal
Thanks for the reply Jamal.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1546 | |
1030 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.