[Q] DHCP Server Option 150

[reiyun]

Hi, there.

I'm preparing to set the "option 150" settings as follows..

Are both the correct commands?

TFTP Server 1 - 10.10.10.1.

TFTP Server 2 - 10.10.10.2

ex)1 config system dhcp server    edit 1       set option1 150 '0A0A0A0A010A0A0A0A02'    next end

ex2) config system dhcp server    edit 1       set option1 150 '0A0A0A0A01'       set option2 150 '0A0A0A0A02'    next end

I think the first command is correct. What do you think?

Thanks.

[Toshi_Esumi]

You're misunderstanding the "value" you need to translate into HEX for option 150. See below thread:

https://forum.fortinet.com/tm.aspx?m=131937

[ede_pfau]

@reiyun: both code lines are incorrect...try

   set option1 150 '0a0a0a01'
   set option2 150 '0a0a0a02'

It's only 4 bytes, not 5...

[Toshi_Esumi]

As I posted based on my experience with Cisco, or other, IP phones, they take binary with option 150. Not dotted-decimal notation.

[Toshi_Esumi]

I might have confused you but ede_pfau is correct.