Public IP addresses on the LAN Ports

[mdarnell]

We are getting a new connection and were given these instructions:

Customer Assigned IP: 205.172.X.X/30

DRF Gateway 205.172.X.X

Customer LAN IPs: 208.111.X.X/28 - 13 Usable IPs: 208.111.X.X  to  208.111.X.X

Can you do this with a 60E, have public IPs on the LAN ports?  The devices on the LAN side of the router will have the public IPs 208.111.X.X

Thanks

[ede_pfau]

Hello,

and welcome to the forums.

Yes, you can use ANY address space on ANY port of a FGT - except for some models with a "mgmt" port. Reason for the latter is that the "mgmt" interface will not be included in routing.

The printed labels on a FGT are just suggestions for the most common use.