Protected subnets not pushed to fortigate

[gabriel24]

Hello,

I'm fairly new to using fortimanager for VPN configuration, so here is my problem.

I have to fortigates in a lab environment both on the same Adom for simplicity and I want to create a Site-to Site VPN between them.

What I have observed is that no matter what subnet/s I define as a protected subnet the manager when pushes the configuration to the fortigates it does not define any subnets in the phase2-interface and so the fortigate has 0.0.0.0/0.

I tried using static objects as well as dynamic mapping but with no luck.

Could you please advise?

This is part of the configuration to be pushed to the fortigate:

"config vpn ipsec phase2-interface edit "Default_1_0"         set phase1name "Default_1"         set proposal aes128-sha1         set auto-negotiate enable         set comments "[created by FMG VPN Manager]"         set keylifeseconds 1800 next"

Regards