Problem with SFP on ULL ports after upgrade from 7.2.9 to 7.4.5

[Max-Payne-WSA]

Hi, due to the transition of software 7.4 to mature status, we decided to update the 401F from version 7.2.9 to 7.4.5.

Unfortunately, after the update, the SFP ports x5-x8 (ULL) have no link.
Downgrading to version 7.2.10 solved the problem.

[ametkola]

Hello Max-Payne-WSA ,

Did you check speed and duplex settings ? You can further check
the status using the commands :

# diag hardware deviceinfo nic <interface>
# get system interface physical
# get system interface transceiver
# get system interface transceiver <interface>

Regards,

ametkola