I have problem with Meru MC1550. Device does not respond to ping...
I can connect via console cable, but I get errors... What can I do?
[ 2.119455] usbhid: v2.6:USB HID core driver
[ 2.123843] Netfilter messages via NETLINK v0.30.
[ 2.128635] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.134982] ctnetlink v0.93: registering with nfnetlink.
[ 2.140463] TCP bic registered
[ 2.143591] Initializing XFRM netlink socket
[ 2.147938] NET: Registered protocol family 17
[ 2.152471] Using IPI Shortcut mode
[ 2.761588] ata1.00: SATA link down (SStatus 0 SControl 310)
[ 2.767338] ata1.01: SATA link down (SStatus 0 SControl 310)
[ 3.478989] ata2.01: failed to resume link (SControl 0)
[ 3.494968] ata2.00: SATA link down (SStatus 0 SControl 310)
[ 3.500716] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 3.506317] md: Waiting for all devices to be available before autodetect
[ 3.513185] md: If you don't use raid, use raid=noautodetect
[ 3.519192] md: Autodetecting RAID arrays.
[ 3.523364] md: Scanned 0 and added 0 devices.
[ 3.527884] md: autorun ...
[ 3.530743] md: ... autorun DONE.
[ 3.539398] kjournald starting. Commit interval 5 seconds
[ 3.545816] EXT3-fs: mounted filesystem with writeback data mode.
[ 3.551998] VFS: Mounted root (ext3 filesystem) readonly on device 3:6.
[ 3.558710] Freeing unused kernel memory: 300k freed
[ 3.655651] init[1]: segfault at bf582070 ip b78da41e sp bfd81f88 error 4 in ld-2.5.so[b78d4000+1a000]
[ 3.665233] Kernel panic - not syncing: Attempted to kill init!
[ 3.671422] Pid: 1, comm: init Not tainted 2.6.32.10 #1
[ 3.677454] Call Trace:
[ 3.680308] [<c041fbd5>] panic+0x3f/0xe6
[ 3.684540] [<c0421fa9>] do_exit+0x55/0x517
[ 3.688883] [<c04224d1>] do_group_exit+0x66/0x8e
[ 3.693658] [<c042a30f>] get_signal_to_deliver+0x2d8/0x2ee
[ 3.699310] [<c06114a3>] ? do_page_fault+0x0/0x27d
[ 3.704266] [<c0401fcf>] do_notify_resume+0x71/0x716
[ 3.709388] [<c042067b>] ? printk+0x15/0x17
[ 3.713730] [<c0412b00>] ? __bad_area_nosemaphore+0xd5/0xe8
[ 3.719468] [<c0412b41>] ? __bad_area+0x2e/0x37
[ 3.724156] [<c0412b67>] ? bad_area+0xd/0x10
[ 3.728584] [<c0611664>] ? do_page_fault+0x1c1/0x27d
[ 3.733706] [<c06114a3>] ? do_page_fault+0x0/0x27d
[ 3.738655] [<c0402926>] work_notifysig+0x13/0x19
[ 3.743518] [<c06114a3>] ? do_page_fault+0x0/0x27d
▒
[ 0.000000] Linux version 2.6.32.10 (root@phobos) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Tue Jun 4 19:34:32 PDT 2013
[ 0.000000] KERNEL supported cpus::128M
[ 0.000000] Intel GenuineIntelze=0x1e3e20]
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fac0000 (usable)
[ 0.000000] BIOS-e820: 000000007fac0000 - 000000007face000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007face000 - 000000007fae0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fae0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x7fac0 max_arch_pfn = 0x1000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 1152MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] node 0 low ram: 00000000 - 379fe000
[ 0.000000] node 0 bootmap 00012000 - 00018f40
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00379fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000400000 - 000085de54] TEXT DATA BSS ==> [0000400000 - 000085de54]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [000085e000 - 00008641be] BRK ==> [000085e000 - 00008641be]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Reserving 64MB of memory at 16MB for crashkernel (System RAM: 2042MB)
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0007fac0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0007fac0
[ 0.000000] Using APIC driver default
[ 0.000000] Intel MultiProcessor Specification v1.1
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID: Intel
[ 0.000000] MPTABLE: Product ID: MoonCreek
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #2
[ 0.000000] I/O APIC #1 Version 32 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages/cpu @c6200000 s20696 r0 d24360 u1048576
[ 0.000000] pcpu-alloc: s20696 r0 d24360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518743
[ 0.000000] Kernel command line: root=/dev/hda6 console=ttyS0,115200 ide_core.nodma=0.0 console=tty0 crashkernel=512M-2G:64M,2G-:128M
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0007fac0)
[ 0.000000] Memory: 2002928k/2091776k available (2125k kernel code, 87324k reserved, 1139k data, 300k init, 1180424k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff20000 - 0xfffff000 ( 892 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc0731000 - 0xc077c000 ( 300 kB)
[ 0.000000] .data : 0xc0613452 - 0xc0730138 (1139 kB)
[ 0.000000] .text : 0xc0400000 - 0xc0613452 (2125 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Using PIT calibration value
[ 0.000000] Detected 1799.871 MHz processor.
[ 0.007005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.74 BogoMIPS (lpj=1799871)
[ 0.009082] Mount-cache hash table entries: 512
[ 0.011110] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.013003] CPU: L2 cache: 512K
[ 0.014004] CPU: Unsupported number of siblings 4
[ 0.015005] using mwait in idle threads.
[ 0.016016] Checking 'hlt' instruction... OK.
[ 0.021738] Freeing SMP alternatives: 13k freed
[ 0.022129] ExtINT not setup in hardware but reported by MP table
[ 0.023275] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.034838] CPU0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz stepping 0a
[ 0.139203] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.007999] Initializing CPU#1
[ 0.007999] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.007999] CPU: L2 cache: 512K
[ 0.007999] CPU: Unsupported number of siblings 4
[ 0.211023] CPU1: Intel(R) Atom(TM) CPU D525 @ 1.80GHz stepping 0a
[ 0.214007] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.215048] Brought up 2 CPUs
[ 0.216004] Total of 2 processors activated (7199.21 BogoMIPS).
[ 0.218568] NET: Registered protocol family 16
[ 0.219722] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
[ 0.220005] PCI: Using configuration type 1 for base access
[ 0.227615] bio: create slab <bio-0> at 0
[ 0.228274] vgaarb: loaded
[ 0.230072] SCSI subsystem initialized
[ 0.232170] usbcore: registered new interface driver usbfs
[ 0.233129] usbcore: registered new interface driver hub
[ 0.234079] usbcore: registered new device driver usb
[ 0.235149] PCI: Probing PCI hardware
[ 0.236316] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.237006] pci 0000:00:1c.0: PME# disabled
[ 0.238065] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.239005] pci 0000:00:1c.1: PME# disabled
[ 0.240065] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.241005] pci 0000:00:1c.2: PME# disabled
[ 0.242065] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.243005] pci 0000:00:1c.3: PME# disabled
[ 0.244062] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.245005] pci 0000:00:1c.4: PME# disabled
[ 0.246066] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.247005] pci 0000:00:1c.5: PME# disabled
[ 0.248208] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.249005] pci 0000:00:1d.7: PME# disabled
[ 0.250142] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.251007] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.252006] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 000f)
[ 0.253005] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00f0 (mask 000f)
[ 0.254005] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00f0 (mask 000f)
[ 0.255194] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.256005] pci 0000:00:1f.2: PME# disabled
[ 0.258249] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.259008] pci 0000:02:00.0: PME# disabled
[ 0.260264] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.261008] pci 0000:03:00.0: PME# disabled
[ 0.262276] pci 0000:00:1e.0: transparent bridge
[ 0.263150] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.266575] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2815]
[ 0.267469] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.270756] Switching to clocksource tsc
[ 0.271973] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.277984] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.283372] pci 0000:00:1c.0: MEM window: 0xfea00000-0xfeafffff
[ 0.289542] pci 0000:00:1c.0: PREFETCH window: 0x00000080000000-0x000000801fffff
[ 0.297225] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.303217] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 0.308601] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff
[ 0.314771] pci 0000:00:1c.1: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.322454] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.328447] pci 0000:00:1c.2: IO window: 0x1000-0x1fff
[ 0.333837] pci 0000:00:1c.2: MEM window: 0x80400000-0x805fffff
[ 0.340012] pci 0000:00:1c.2: PREFETCH window: 0x00000080600000-0x000000807fffff
[ 0.347701] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.354867] pci 0000:00:1c.3: IO window: 0x2000-0x2fff
[ 0.360258] pci 0000:00:1c.3: MEM window: 0x80800000-0x809fffff
[ 0.366429] pci 0000:00:1c.3: PREFETCH window: 0x00000080a00000-0x00000080bfffff
[ 0.374110] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[ 0.380106] pci 0000:00:1c.4: IO window: 0x3000-0x3fff
[ 0.385497] pci 0000:00:1c.4: MEM window: 0x80c00000-0x80dfffff
[ 0.391667] pci 0000:00:1c.4: PREFETCH window: 0x00000080e00000-0x00000080ffffff
[ 0.399350] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07
[ 0.405345] pci 0000:00:1c.5: IO window: 0x4000-0x4fff
[ 0.410727] pci 0000:00:1c.5: MEM window: 0x81000000-0x811fffff
[ 0.416898] pci 0000:00:1c.5: PREFETCH window: 0x00000081200000-0x000000813fffff
[ 0.424581] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.430574] pci 0000:00:1e.0: IO window: disabled
[ 0.435525] pci 0000:00:1e.0: MEM window: disabled
[ 0.440559] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.446045] pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 22
[ 0.452666] pci 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 23
[ 0.459284] pci 0000:00:1c.2: enabling device (0104 -> 0107)
[ 0.465023] pci 0000:00:1c.2: PCI->APIC IRQ transform: INT C -> IRQ 20
[ 0.471634] pci 0000:00:1c.3: enabling device (0104 -> 0107)
[ 0.477374] pci 0000:00:1c.3: PCI->APIC IRQ transform: INT D -> IRQ 21
[ 0.483983] pci 0000:00:1c.4: enabling device (0104 -> 0107)
[ 0.489723] pci 0000:00:1c.4: PCI->APIC IRQ transform: INT A -> IRQ 22
[ 0.496336] pci 0000:00:1c.5: enabling device (0104 -> 0107)
[ 0.502074] pci 0000:00:1c.5: PCI->APIC IRQ transform: INT B -> IRQ 23
[ 0.508880] NET: Registered protocol family 2
[ 0.513385] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.520796] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.529094] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.536202] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.542906] TCP reno registered
[ 0.546284] NET: Registered protocol family 1
[ 0.573555] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.586210] highmem bounce pool size: 64 pages
[ 0.590895] VFS: Disk quotas dquot_6.5.2
[ 0.594914] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.601663] msgmni has been set to 1608
[ 0.605790] alg: No test for stdrng (krng)
[ 0.610058] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.617577] io scheduler noop registered
[ 0.621574] io scheduler anticipatory registered
[ 0.626263] io scheduler deadline registered
[ 0.630635] io scheduler cfq registered (default)
[ 0.637038] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.642758] pci-stub: invalid id string ""
[ 0.651800] Non-volatile memory driver v1.3
[ 0.656067] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
▒[ 0.906270] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.915655] brd: module loaded
[ 0.918795] Uniform Multi-Platform E-IDE driver
[ 0.923566] piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03)
[ 0.930189] pci 0000:00:1f.1: PCI->APIC IRQ transform: INT A -> IRQ 19
[ 0.936812] piix 0000:00:1f.1: IDE port disabled
[ 0.941510] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 0.948462] ide: disallowing DMA for hda
[ 0.952459] ide0: BM-DMA at 0xffa0-0xffa7
[ 1.220284] hda: TS4GCF150, CFA DISK drive
[ 1.836719] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.842778] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 1.852644] ide-gd driver 1.18
[ 1.855804] hda: max request size: 128KiB
[ 1.859888] hda: 7831152 sectors (4009 MB) w/1KiB Cache, CHS=7769/16/63
[ 1.866720] hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
[ 1.893329] ata_piix 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 18
[ 1.900381] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.056109] scsi0 : ata_piix
[ 2.059213] scsi1 : ata_piix
[ 2.062255] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 18
[ 2.069475] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 18
[ 2.080179] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.085225] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.090548] mice: PS/2 mouse device common for all mice
[ 2.098056] usbcore: registered new interface driver hiddev
[ 2.103792] usbcore: registered new interface driver usbhid
[ 2.109535] usbhid: v2.6:USB HID core driver
[ 2.113939] Netfilter messages via NETLINK v0.30.
[ 2.118730] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.125076] ctnetlink v0.93: registering with nfnetlink.
[ 2.130561] TCP bic registered
[ 2.133686] Initializing XFRM netlink socket
[ 2.138033] NET: Registered protocol family 17
[ 2.142557] Using IPI Shortcut mode
[ 2.746671] ata1.00: SATA link down (SStatus 0 SControl 310)
[ 2.753080] ata1.01: SATA link down (SStatus 0 SControl 310)
[ 3.456898] ata2.01: failed to resume link (SControl 0)
[ 3.472881] ata2.00: SATA link down (SStatus 0 SControl 310)
[ 3.478627] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 3.484227] md: Waiting for all devices to be available before autodetect
[ 3.491088] md: If you don't use raid, use raid=noautodetect
[ 3.497101] md: Autodetecting RAID arrays.
[ 3.501276] md: Scanned 0 and added 0 devices.
[ 3.505787] md: autorun ...
[ 3.508646] md: ... autorun DONE.
[ 3.517293] kjournald starting. Commit interval 5 seconds
[ 3.523705] EXT3-fs: mounted filesystem with writeback data mode.
[ 3.529888] VFS: Mounted root (ext3 filesystem) readonly on device 3:6.
[ 3.536599] Freeing unused kernel memory: 300k freed
[ 3.633564] init[1]: segfault at bf6d9530 ip b774b41e sp bfed9448 error 4 in ld-2.5.so[b7745000+1a000]
[ 3.643177] Kernel panic - not syncing: Attempted to kill init!
[ 3.649367] Pid: 1, comm: init Not tainted 2.6.32.10 #1
[ 3.655402] Call Trace:
[ 3.658253] [<c041fbd5>] panic+0x3f/0xe6
[ 3.662488] [<c0421fa9>] do_exit+0x55/0x517
[ 3.666830] [<c04224d1>] do_group_exit+0x66/0x8e
[ 3.671615] [<c042a30f>] get_signal_to_deliver+0x2d8/0x2ee
[ 3.677264] [<c06114a3>] ? do_page_fault+0x0/0x27d
[ 3.682222] [<c0401fcf>] do_notify_resume+0x71/0x716
[ 3.687356] [<c060e64b>] ? schedule+0x680/0x71e
[ 3.692052] [<c0412b67>] ? bad_area+0xd/0x10
[ 3.696478] [<c0611664>] ? do_page_fault+0x1c1/0x27d
[ 3.701602] [<c06114a3>] ? do_page_fault+0x0/0x27d
[ 3.706559] [<c0402926>] work_notifysig+0x13/0x19
[ 3.711421] [<c06114a3>] ? do_page_fault+0x0/0x27d
Hi,
Do you able to get the login prompt via console or it is rebooting continuously.
According to the logs it looks like the file system corrupted.
[ 3.643177] Kernel panic - not syncing: Attempted to kill init!
[ 3.649367] Pid: 1, comm: init Not tainted 2.6.32.10 #1
[ 3.655402] Call Trace:
[ 3.658253] [<c041fbd5>] panic+0x3f/0xe6
[ 3.662488] [<c0421fa9>] do_exit+0x55/0x517
[ 3.666830] [<c04224d1>] do_group_exit+0x66/0x8e
[ 3.671615] [<c042a30f>] get_signal_to_deliver+0x2d8/0x2ee
[ 3.677264] [<c06114a3>] ? do_page_fault+0x0/0x27d
[ 3.682222] [<c0401fcf>] do_notify_resume+0x71/0x716
Regards
Jamal Hussain
Hi,
Thank you very much for your answer.
Controller is not reeboting, but I don't see place to login.
I can choose Linux 2.6.32.10 MCNG or Linux System Recovery,
but in the end there is still the same error:
Does anyone else have this firmware?
User | Count |
---|---|
2549 | |
1356 | |
795 | |
646 | |
455 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.