Helo, I am with problem with link monitor in the FGT 100D 5.2.9. I did in of all, but the FGT no identify link is down.
Test:
### I disconnected the cable in the port1
# config system link-monitor edit "Link1" set srcintf "port1" set server "8.8.8.8" "200.221.2.45" set timeout 5 set failtime 3 set recoverytime 3 set update-cascade-interface disable next edit "Link2" set srcintf "wan1" set server "8.8.8.8" "200.221.2.45" set timeout 5 set failtime 3 set recoverytime 3 set update-cascade-interface disable next edit "Link3" set srcintf "wan2" set server "8.8.8.8" "200.221.2.45" set timeout 5 set failtime 3 set recoverytime 3 set update-cascade-interface disable next end
# diag test application lnkmtd 3 now_jiffies=448297941 'dmz': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=3171, broughtdown_jiffies=0 'ha1': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=3171, broughtdown_jiffies=0 'ha2': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=3171, broughtdown_jiffies=0 'mgmt': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=3171, broughtdown_jiffies=0 'modem': link=no, brought_up=0, brought_down=0, signal_sent=0, broughtup_jiffies=0, broughtdown_jiffies=0 'port1': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=297687, broughtdown_jiffies=0 'port10': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=3171, broughtdown_jiffies=0 'port11': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=3171, broughtdown_jiffies=0 'port12': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=3171, broughtdown_jiffies=0 'port13': link=ok, brought_up=0, brought_down=0, signal_sent=0, broughtup_jiffies=0, broughtdown_jiffies=0 'port14': link=ok, brought_up=0, brought_down=0, signal_sent=0, broughtup_jiffies=0, broughtdown_jiffies=0 'port15': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=3171, broughtdown_jiffies=0 'port16': link=ok, brought_up=0, brought_down=0, signal_sent=0, broughtup_jiffies=0, broughtdown_jiffies=0 'port2': link=no, brought_up=0, brought_down=0, signal_sent=0, broughtup_jiffies=0, broughtdown_jiffies=0 'port3': link=no, brought_up=0, brought_down=0, signal_sent=0, broughtup_jiffies=0, broughtdown_jiffies=0 'port4': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=3171, broughtdown_jiffies=0 'port5': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=3171, broughtdown_jiffies=0 'port6': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=3171, broughtdown_jiffies=0 'port7': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=3171, broughtdown_jiffies=0 'port8': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=3171, broughtdown_jiffies=0 'port9': link=no, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=3171, broughtdown_jiffies=0 'wan1': link=ok, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=295287, broughtdown_jiffies=0 'wan2': link=ok, brought_up=1, brought_down=0, signal_sent=0, broughtup_jiffies=296487, broughtdown_jiffies=0 lnkmtd::ping_epoll_callback(142): ping response 10.50.50.2, buf-sz=28
# get system link-monitor
== [ port1] name: WCS timeout: 5 == [ wan1] name: GVT timeout: 5 == [ wan2] name: CTBC timeout: 5
# diagnose sys link-monitor interface port1
Interface(port1): state(up, since Wed Jan 4 16:07:38 2017 ), bandwidth(27236), session count(0) latency(0.00), jitters(0.00).
# diagnose sys link-monitor st
PORT1 Status: alive Create time: Wed Jan 4 16:07:38 2017 Source interface: port1 (7) Source IP: XXX.XXX.XXX.170 Gateway: XXX.XXX.XXX.169 Interval: 5, Timeout 5 Fail times: 0/3 Send times: 0 Peer: 200.221.2.45(200.221.2.45) Source IP(XXX.XXX.XXX.170) protocol: ping, state: alive Latency(recent/average): 0.00/0.00 ms Jitter: 0.00 Recovery times(0/3) Continuous sending times after the first recovery time 0 Packet sent: 0 Packet received: 0 Peer: 8.8.8.8(8.8.8.8) Source IP(XXX.XXX.XXX.170) protocol: ping, state: alive Latency(recent/average): 0.00/0.00 ms Jitter: 0.00 Recovery times(0/3) Continuous sending times after the first recovery time 0 Packet sent: 0 Packet received: 0
-----------------------------------------------------------------------------------
the last time that i had this error, i removed the config at linkMonitor, reboot the FGT and I did configuration the linkMonitor again. After that, It came back work. But the problem retorn with the time.
Does picture helped anything?
Hello,
As we don't a solution, i formatted the FGT and import the backup. Now it is OK.
But the problem return with time.
Thanks this help.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.