Hi please i have a huge problem.
I have an EC2 instance on AWS with IP address 172.31.X.X that I want to communicate with another remote instance of a customer always on AWS with IP address 172.33.X.X through a fortigate IPsec VPN tunnel on both sides else.
For the fortigate 1 we have LAN: 172.31.X.Y, WAN: 172.31.Y.Z and the pubilc IP
For the fortigate 2 we have LAN: 172.33.X.Y, WAN: 172.33.Y.Z and the public IP
the vpn tunnel is UP but when I ping from the ec2 172.31.X.X to the remote ec2 172.33.X.X the ping does not go through and when I try to get out of the network I cannot. From the servers we can't ping the internet. Apparently it's a routing problem but I don't know which side.
Here is the architecture
EC2 ===> Fortigate 1 ===> tunnel ===> Fortigate 2 ===> EC2
But the traffic is blocked internally (between EC2 and Fortigate) and does not go out
Please i want some help
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Do you have a FW Policy that allows the traffic from LAN interface to WAN interface?
What does your VPC route table look like on either side?
Hello and thank you for your answer.
Here is the routing table at each point
- Private Subnet 1 routing table
Destination Target
172.31.X.X/16 local
0.0.0.0/0 ENI-LAN fortigate 1
-Public Subnet 1 routing table
Destination Target
0.0.0.0/0 IGW (Internet Gateway)
-Public subnet 2 routing table
Destination Target
0.0.0.0/0 IGW
-Private Subnet 2 routing table
Destination Target
172.31.X.X/16 local
172.32.X.X/16 local
172.33.X.X/16 local
0.0.0.0/0 ENI - LAN Fortigate 2
I hand over the architecture
EC2=======>Fortigate1=======>Fortigate2=======>EC2
172.31.X.X LAN: 172.31.X.Y LAN: 172.33.X.Y 172.33.X.X
Wan: 172.31.Y.Z Wan: 172.33.Y.Z
Public IP: 18.215.Z.Z Public IP : 52.5.Z.Z
Private subnet 2 route table looks problematic. You have remote subnet 172.31.X.X/16 listed as local.
Thanks for update, i remove it now but i have this problem.
An ec2 instance behind a fortigate 1 and when I ping the LAN address 172.31.X.Y of the fortigate 1 and the ping goes through but when I ping the WAN address the ping does not go through. What are the ways to make them communicate. I have already configured access to fortigate 1 from the instance in the fortigate 1 security group and the routing table in the private subnet is redirecting all traffic to the LAN interface of the fortigate 1
are you allowing pings on the FortiGate WAN interface?
I know that it is not good but i allow all traffic on WAN and LAN
are you pinging the actual WAN ip address (172.x.X.X) assigned to the Fortigate interface or the elastic public ip assigned by AWS?
i try to ping the WAN ip address (172.X.X.X) as assigned to the Fortigate interface because the ec2 cannot have access to internet through fortigate
Can you show your WAN interface config please? (show system interface <wan_port>)
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1712 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.