Hello All Members. I'm new here so on the beginning very welcome All.
Two weeks ago starter migration from HPE switches to Fortiswitches. Now I found issue with Cisco AP
Radio firmware crashed during boot AP. This never happened on HPE. I made many cross tests and now I'm stuck.
AP connected to FS - stuck during boot. From time to time booting ok but after few min crash. The same AP connected over the same cable to HPE switch booting fine and working stable.
HPE switches ( HP 5406 with POE+, 2920 (POE+) 3500yl(POE+)
FortiSwitches 248E-FPOE, 108E FPOE, 224D-FPOE, FortiOS 6.4.5 , 7.0.4, 7.2.4
On fortiswich the same situation. Now I'm stupid , what is going on.
FortiSwitches managed by FG200E on FortiOS 6.4.12.
Also have problem with other devices like UPS management cards (eaton) probably auto negotiation issue and with links between FS and other switches via fiber SFP. But for this I found workaround. HAve to set speed port manually to AUTO (Not 1000Auto).
Any help, suggestions will be very helpful
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello plsikk,
Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.
Thanks,
Hello,
We are still looking for an answer to your question.
We will come back to you ASAP.
Thanks,
Hi plsikk,
Thank you for the query.
What is the speed negotiation required for the Cisco APs?
Also are the APs connected via one link or two links?
If the APs are crashing, the first plan would be to use manual speed negotation and just one direct link to see if it is stable.
On switch , it should be direct troubleshooting i.e speed/duplex/poe and stp.
You can aswell disable stp on the specific AP connected port to see if the Cisco AP remains stable.
If the issue still persists post above changes, I would recommend to open a support case on both AP vendor end and Fortiswitch end.
Hi
I don't know why but if |AP is disconnected for more then one day and ip address expire on DHCP and connected after this one day - is booting fine and working ok. Crazy for me
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1518 | |
1018 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.