Hello
I have two access point 222E-I Outdoor and we configure in mesh mode:
therefore, the main AP 222E and second AP mesh !!
PLease , i need from Expert fortiAP answer me for four questions :
1) what is the maximum range of coverage for AP222E main ??,
2) what 's the maximum height on the wall that allow give a good coverage ???
3) The question is the most important!!! ( our problem in the project ) :
How to increase the throuput because we have always 1 mbits !!! what is parameter ( DCA , Power level , Modulation , ....... ) that allow increase throuput !!!! ???
4) How to obtain the same throuput between Prinipal AP to Mesh AP ???
So , i wait a reply from Expert fortiAP and and help me to answer me for 4 question especially we have a problem about throughput ( question 3 and question 4 ) ...
i send a picture about the AP22E
thanks in advance
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi Safwa,
Can you please share some more information regarding your set-up.
1. On which radio are you forming the mesh up-link?
2. How are you running your throughput tests? (tools, clients, topology, traffic type is udp or tcp etc)
You can find more details about the AP in this data sheet.
https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/fortiap-series.pdf
Hello
thanks to reply me
1) For topologie : AP root is linked with internet router and we remote controller fortigate (customer side)
+++So AP root give radio 5gh to AP leaf and AP leaf give radio 2.4 GHZ to users
2) we use speed test throught phone and we test throuput without traffic UDP or TCP !!
Please Jay-D i need your help and the most important, how to increase throuput in mesh for two AP 222e ??? ( we need configuration or what i can doing !!! )
===> also i need your reply what's the distance between AP root and AP leaf to be the installation topologie mesh is correct ????
i wait your answer and your help
thanks in advance
Hi Safwa,
Thanks for the info. Could you please run one test. Connect your wireless clients to AP root and see what is the throughput achieved. Speedtest app on phones checks the speed based on the internet connection. Suggest to run throughput test between local clients connected behind AP root & AP leaf and use tools such as iperf to run tcp and UDP traffic.
Also, from your above statement "we test throuput without traffic UDP or TCP !!"; then what traffic type are you using to run throughput?
There are many variables here which comes to play in order to achieve good throughput. Distance between the root and leaf AP, type of antenna used, environment/noise. If you are using default external antennas which comes with 222E, it has Peak Gain Dipole: 5 dBi for 2.4 GHz(approx. max range 500 ft), 7 dBi for 5 GHz(approx. max range 800ft). If you need longer range then you need to attach higher gain antenna.
Hope this information helps.
thanks to reply me !!
But you don't answet for this two question to know :
1) what's the distance between AP root and AP leaf to be for the installation topologie mesh is correct !!!
2) what 's the maximum height on the wall ( pole ) that allow give a good coverage ???
i wait to reply me for two questions !!!
also i want to thank you about help me !!!
thanks in advance
Hi Safwa,
I'm not from support. Can only provide the suggestions for your problem. Please open a ticket with Fortinet tech support. They should be able to provide the answers.
Regards,
Jay
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1690 | |
1087 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.