Presales Question AP231E

[Chris66at]

Hello,

the AP 231E has two LAN ports. Unfortunately I can't find any information about the the Lan Passthough Funtionality. Does someone knew, wheter it's possible with the 231E or not ? Thank you for your informations

christian

[yzhang_FTNT]

What you are looking for is to forward traffic from one LAN port to another LAN port?

[Chris66at]

the configuration should be: POE Switch ----> AP231E Lan Port1 --- AP231E Lan Port2 -----> LAN Port PC

[yzhang_FTNT]

You can try below configs:

On the FAP, set WANLAN_MODE to WAN-LAN. 

cfg -a WANLAN_MODE=WAN-LAN

lan1 is wan port, and should be used to connect to the controller.

lan2 is lan port, and should be used to connect to the PC.

On the controller, set lan port mode to bridge-to-wan in wtp-profile config:

config wireless-controller wtp-profile edit "231e" set wan-port-mode wan-lan config lan set port-mode bridge-to-wan end end