Port forwarding non-standard service

[ciaranmclarnon]

Hi there,

I am using Fortigate FG50B v4 for testing port forwarding to a webserver on a non-standard port.

I have watched the videos for forwarding http, ssh and ftp and all work when tested; but I have a webserver that listens on an unusual port - 1501.  I created a NEW service and used the same rule that works for rdp replacing RDP with the new service and the forwarding port on the VIP to 1501.  But the traffic doesn't seem to reach the webserver.

Also tried with Nat enabled and disabled but no luck.

Anyone done this before with non-standard port/service?

Thanks