Port TCP 541

[#1]

Dear All, After update I was check my protection using a web site, I discovered that the port TCP 541 is open, I check on documentation (http://kc.forticare.com/default.asp?id=773) that Fortinet use this port for SSL, but I dont use this port, meanwhile, this port should the status as shealt. I need to close this port, you know, many thanks

[UkWizard]

according to the doc its so that it can send feedback and get info for the fortiguard functionality. So if you have any of the fortiguard services enabled, then this is probably why. I wouldn' t worry about it.

[ejhardin]

Check out.... http://kc.forticare.com/default.asp?id=3724&Lang=1&SID= ............................................................ To disable the management tunnel On the FortiGate unit, connect to the CLI. Enter the following CLI commands: config sys management-tunnel set status disable end TCP 541 is closed.

[laf]

I m just a bit curious: how did you find out that the port is opened ?

[#5]

Look this websites: it' s very good to do a test your firewall 1) https://www.grc.com/x/ne.dll?bh0bkyd2 2) http://www.digconsys.com/testdir/portscan.html 3)http://whacker4.hackerwhacker.com/freetools.php Good Look Eduardo Pereira