Port 445 not accessible through SSL VPN Tunnel

[#1]

Hello all, Wondering if anyone else has run into this issue. Vista and XP client systems while in VPN SSL Tunnel mode, can' t telnet or access port 445. I have all services and ports accessible through the SSL gateway on the firewall policy. Any ideas on what to look for? Thanks! Zane

[#2]

Hi suggestions only Can you initiate ping from ssl client to the workstation? Pls check also your routing. Thanks

[#3]

Yes, ping works as do all other services that we need. The Vista client computer is attempting to establish a mapped drive and it is giving errors that the destination firewall (The ForitNet) has port 445 blocked. The firewall policies have the rule to allow all services in both directions.

[#4]

i assume that it because you have to enable the smb?cifs option in the ssl portal page settings. ssl- portal- click on the applied portal page- settings- enable smb/cifs option.