Hi everybody
I got an issue with my FortiManager. When I'm working with the Policy Packages it take too many time until the GUI shows it (about 40 seconds) then I can work with it normally bur if I change to another PolicyPackages it took again the same time.
The system resources shows CPU and Memory are at 20-30% in the last 24 hours.
ProductFortiManager-VM64
Firmware Version5.4.2 GA Build Number1151 Build Time2016/12/13
Do anybody knows if this is a normal behaviour?
Best regards
Gonzalo Arroyo
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi, Gonzalo, for your VM setup, how many vCPU and memory assigned?
and what is your client PC config like CPU and memory and which browser you are using?
May I know how many policies in a package and how many packages?
Thanks
Simon
Hi Simon
It uses 8Ghz, and 8Gbram. See attached file
I tried from several computers and different browsers with the same behaviour
I have about 24 policypackages and 100 policies per packages
best regards
file
Can you help provide some top output (exec top) during that 40s loading policy?
Thanks
Simon
Hi all,
The top output shows the following when is loading policy:
top - 19:14:00 up 1 day, 6:39, 0 users, load average: 4.58, 4.52, 4.66 Tasks: 210 total, 3 running, 207 sleeping, 0 stopped, 0 zombie %Cpu(s): 40.0 us, 10.3 sy, 0.0 ni, 49.2 id, 0.0 wa, 0.0 hi, 0.6 si, 0.0 st MiB Mem : 7996.203 total, 3042.023 free, 2161.191 used, 2792.988 buff/cache MiB Swap: 2027.867 total, 2027.867 free, 0.000 used. 4966.023 avail Mem
PID USER PR NI VIRT RES %CPU %MEM TIME+ S COMMAND 32400 root 20 0 967.2m 316.2m 99.7 4.0 0:56.55 R scheduled --get_device_hit_count 32618 root 20 0 946.3m 609.6m 99.3 7.6 0:08.16 R svc dbcache reader 403 root 20 0 156.0m 12.6m 0.7 0.2 0:21.54 S /bin/miglogd 343 root 20 0 633.0m 282.8m 0.3 3.5 1:05.20 S gui control 464 root 20 0 831.2m 35.0m 0.3 0.4 0:52.48 S /bin/oftpd 32627 root 20 0 17.5m 2.4m 0.3 0.0 0:00.07 R top 1 root 20 0 602.2m 274.3m 0.0 3.4 0:20.00 S /bin/initXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 2 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [kthreadd] 3 root 20 0 0.0m 0.0m 0.0 0.0 0:02.17 S [ksoftirqd/0] 4 root 20 0 0.0m 0.0m 0.0 0.0 0:00.00 S [kworker/0:0]
Kind Regards
not sure if issue related to hit count update, can you help check for 2 things
1. in policy column settings, remove these hit count column display if helps
2. in System Settings - Advanced settings, disable "Policy Hit Count"
Thanks
Simon
HI Simon
Sorry for the delay. I did what you say but the performance is the same.
Do you have any other idea about could it be?
Gonzalo Arroyo
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1702 | |
1092 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.