Policy route can't select sd-wan

[lichunkei]

Hi all,

I can't setup a policy route that the outgoing interface is sd-wan. Please help.

[MikePruett]

The purpose of the policy route would be to use one of the interfaces that is a member of the SD WAN. unless you are using SDWAN for something other than internet pipe load balancing etc.

[lichunkei]

Dear Mike,

Thanks for your reply, I also want to know if I want to route the 123.123.123.0/24 traffic to internal but only 1 IP like 123.123.123.123/32 to sd-ram? normally I will setup a policy routes to do that. 

One more question, what is the priority routing for static routes, policy routes and sd-wan?

[mahesh_secure]

Hi

Did you check the SDWAN rules ? you can also route traffic with SDWAN rule. you can give specific wan interface in SDWAN rule

Regards

Mahesh