Hello Every one
My office buy new 100D to be our Gateway. and using 2 ISP for sharing different office parts 's network。
Forti OS was 5.2.7
In our plan:
part A will using ISP A and WAN setting was get DHCP.
part B will using ISP B and WAN setting was static public IP, and default route setting here.
and they are each other's backup line.
After we build it finish, we found all parts will using ISP A , only when ISP A remove connect , they turn to ISP B.
Even we change ISP A's Distance to 100 to high than IPS B's 10, or we setting policy routes to make some one using IPS B.
It's not work .
But same setting we copy config to our service vender 's Lab using 60D and 500A, it's work!
We want to ask:
Does anyone have same problem, and fix it ? or what can we do to fix this strange problem? ask our vender to request tech support?
Hunt.liao
2016/07/04 09:40 AM Taiwan
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Monitor the router table when you have the cfg in place for ISP1 and ISP2.
( webgui ) network router monitor
(cli) get router info routing all
Take a look at what's present in the route table and yes PBR override any static or dynamic routing information. So policy based routing takes precedence
PCNSE
NSE
StrongSwan
I think you should use policy based routing which determines what subnet is going out via which isp.
grtz. Ralph
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1641 | |
1069 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.